15 Drystack Stackstone Veneer Concrete Molds #ODF-02 Make 100s Stones, Fast Ship

Description

We are proud to say that
ALL
of our products and the raw materials used in them,
are...
M
A
D
E
I
N
T
H
E
U
S
A
And our molds are designed and have been manufactured in Florida
by us
since 1992
!
NOW WITH FREE SHIPPING WITHIN THE CONTINENTAL USA,
AND DISCOUNTED SHIPPING TO ELSEWHERE IN THE WORLD!
MADE BY US IN AMERICA FOR OVER 27 YEARS!
NEXT DAY FREE SHIPPING!
CAUTION NOTICE!
WHEN CONSIDERING BUYING
FROM A FOREIGN SELLER OR COMPANY.....
READ THEIR ENTIRE LISTING CAREFULLY!
COMPARE PRODUCT BENEFITS!
Be cautious of products made and shipped from foreign countries.
BE SURE YOU ARE GETTING WHAT YOU’RE PAYING FOR.
We ship the next day after order receipt, so you’ll normally have your purchase in 2-3 DAYS or within a week if you are on the West Coast. East coast may take as little as one day to arrive.
WE HAVE BEEN SELLING ON EBAY FOR OVER 20 YEARS!
Review shipping and look for unexpected charges like Import Duties, extra shipping cost and other charges.
“FREE SHIPPING” IS NOT ALWAYS “FREE SHIPPING” IN OTHER COUNTRIES.
Check the number of Negative Feedbacks Buyer has.
Remember YOU are going to pay shipping costs for returns once you see that you are not happy with your purchase… THEN WHAT?
See what shipping costs back to Russia, China, Taiwan, Ukraine, Lithuania and other countries will cost you. They normally
will
cost you.
Look at the total mold sizes and quality of material used.
Look for extra charges that are not mentioned.
Items shipping internationally
may be subject to Customs processing depending on the item's declared value.
USA Buyers
may be subject to additional charges for Customs Duty clearance.
*****************************************************************************************************
DRYSTACK STACKSTONE MOULDS...
WE CALL OURS "OLDE DRYSTACK FLAT-FACED" MOULDS
The "HOW TO" process is so simple... virtually anyone can do it!
It's like making a cake!  But no oven is needed!
HERE'S HOW
...
1.
Lubricate the molds... a light vegetable oil will do if you don't have mold release.
2.
Mix a bag of pre-mix concrete… get a shovel, water, and something to mix it in.
3.
Add some concrete color, which is optional… unless you want just plain gray.
4.
Pour mix into molds… vibrate a bit to compact concrete and release air bubbles.
5.
Let the filled molds sit a day or so, undisturbed… over-night is fine.
6.
Carefully flip the molds over the next day… and pop out what you’ve created from the mold!
That is obviously a simplified version of the process, but it
is
that easy.  And FREE instructions and email support are included with each purchase.
THE BEAUTIFUL STONE SHOWN IN THE PHOTOS CAN BE DUPLICATED WITH STONE VENEER
MADE BY YOU
... IN ANY COLOR YOU WANT... EVEN IF YOU HAVE NO PREVIOUS EXPERIENCE MAKING STONE VENEER! WE PROVIDE COMPLETE FREE INSTRUCTIONS WITH EACH PURCHASE.
This listing is for #ODF-02 is for a sheet of fifteen (15) mould cavities.  We offer two different sheets with 12 moulds on each sheet, and another three sheets in this style which are similar but contain either 13, 15 (THIS SET), or 20 different shapes and sizes of stones.
Each sheet is the same price.
If you have a larger project, and/or want more molds of different shapes and sizes,
view our 72 mold Ebay listing in our Ebay Store...
Save 0.00 on the entire set of five sheets of 72 molds with our #ODF-72 at ONLY 9.99!
And if you have a really large project, you may want to consider mixing these with Ledgestone stones as they blend together so well, and you would get up to another 86 Ledgestone Molds in the full set.
EACH SHEET, OR SET OF MOULDS WILL COVER ABOUT 3 SQUARE FEET WITHOUT ANY DUPLICATION, DEPENDING ON SPACING.  THE 72 MOULD SET COVERS ABOUT 15+ SQUARE FEET.  EACH MOULD IS ABOUT 2" DEEP, WITH THE HEIGHTS AND WIDTHS VARYING DEPENDING ON THE ORIGINAL STONE THAT THE MOULD WAS MADE FROM. PHOTO #2 IS OF THE MASTER BOARD THAT THE MOULDS WERE ACTUALLY MADE FROM.
THE PHOTO OF THE WALL HAS ADDITIONAL LARGER STONES AND SOME LEDGESTONE ADDED IN FOR INTEREST BY THE DESIGNER.  THESE ARE
NOT
PART OF THE STONE SET YOU ARE PURCHASING.  SIMILAR SQUARE AND RECTANGULAR STONES ARE AVAILABLE IN OUR CASTLESTONE, LEDGESTONE, AND LIMESTONE STYLES OF STONE MOULDS.
PLEASE NOTE:
The stones in the photo of the solid Stackstone wall are very tight to each other due to slightly cutting or grinding down the sides to make them more flush with each other. The stones made with these molds will have a slightly larger spacing due to the side angle... as much as 1/4" between each stone. This is so the stones can be de-molded easier, and so they will blend with the Drystack Ledgestone sets of stones in a mixed wall. If you desire very tight layers of stone, you may want to grind the sides down a bit to achieve this. This can be done easily with a composite masonry blade in a circular saw, or trim them with a wet saw to get them to fit tighter. This should only take a minute to do on each stone.
This sheet of molds include the following sizes of molds, most of which will be cut into smaller combinations to make pouring easier.  Some of the molds may be pre-joined together to make it easier to pour and fit during installation. They are nominally sized at:1.75x11, 1.75x12, 2.75x8.5, 1.75x10.25, 1.75x11, 3x8.5, 2.5x7, 3x8, 2x8.5, 2x9.5, 2.25x8.25, 2.75x6.5, 2.75x7, 3x6.75, 2.5x7
SAVE BIG $$$$ - MAKE STONE VENEER FOR AS LITTLE AS {{detail_product_description}}.50 A  SQUARE FOOT OR LESS!
AND YOU CAN START PRODUCING STONE
NEXT WEEK!
WHETHER YOU WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS...
OR JUST WANT TO MAKE TILE, PAVERS, AND STONE FOR YOUR OWN USE... WE ARE THE SOURCE!
YOU ARE PURCHASING A SET OF FIFTEEN (15),
ALL DIFFERENT
,
"OLDE DRYSTACK FLAT-FACED"
CONCRETE MOLDS.
YOU CAN MAKE CUSTOM-COLORED, HEAVY, MEDIUM, OR LIGHT-WEIGHT STONE WITH THEM.
REMINDER... YOU CAN PURCHASE THE ENTIRE SET OF FIVE SHEETS...
72 MOLDS, FOR ONLY 9.98 AND SAVE
0.00!
These molds can be used hundreds of times if cared for properly.
They are made with .060, high-impact, rubberized ABS plastic for strength, durability, and flexibility.
Interested in starting your own business?
Become an "Olde World Stone & Tile" Producer!
Since 1992, we've trained hundreds of entrepreneurs worldwide in how to start and succeed in their own tile, paver, and stone manufacturing businesses!
Our main business is mold design and manufacturing, so
our
success is truly dependent on
your
success!
SEE OUR OTHER LISTINGS OR VISIT OUR
S
T
O
R
E
FOR MORE MOULD STYLES AND SIZES,
AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.
For additional product information, tile and stone installation photos, and more...
visit our extensive Oldeworld and TheMoldStore websites or if you have questions, feel free to email or phone us.